|
Quantity
|
Total
|
||
|
|
|||
We get your mission off the ground
Space missions, scientific or commercial satellites, space research projects such as the ESA Rosetta Mission or the NASA Rover expedition to Mars all have one thing in common – they can only succeed if all the materials, components and assemblies to be used have been successfully tested in high vacuum and ultra-high vacuum conditions.
One example is the simulation of the re-entry of space shuttles into the Earth's atmosphere and also the simulation and testing of engines.
The experimental chamber systems required for this purpose to simulate space conditions in a vacuum are available in all sizes – from a few liters for testing small objects such as printed circuit boards to several thousand cubic meters for the verification of entire spaceships for space travel.
We can supply turnkey system solutions with integrated fore vacuum and high vacuum pumps for this purpose. Specifically tailored to meet your individual needs for your flight test.
UNIVEX S TML
The UNIVEX S TML is a test apparatus for evaluating the mass loss of materials under space conditions.
Every material used in the space industry must successfully pass a TML test prior to being used in space. In this test material samples are heated to 125°C in a high vacuum and the escaping vapours are condensed on a cooled measuring place.
Our UNIVEX S TML allows an automatic test procedure according to the ASTM and ECSS standards.