|
Quantity
|
Total
|
||
|
|
|||
The NMID30-2 V1 energy meter is a modern device designed to monitor basic electrical parameters.
It was designed for 1-phase and 3-phase networks and equipped with a pulse output and an RS-485 interface for remote monitoring of measured parameters or BMS systems. The backlit counter screen can display up to 16 different measured values.
The counter can be configurated by using buttons. It has a current input for direct measurement of maximum 100A.
The backlit counter screen can display up to 16 different measured values.
The counter can be configurated by using buttons. It has a current input for direct measurement of maximum 100A.
- Compliance with the MID directive (B+D modules)
- Active energy measurement in B class
- Measured active energy consumed and returned
- Measurement inputs up to 100A direct current measurement (NMID30-2)
- Built-in pulse output
- RS-485 digital interface with Modbus RTU protocol
- Programmable current direction for correction of reversely connected transformers
Measured parameters
- Phase to phase tension
- Phase voltage
- Frequency
- THD of current and voltage
- Current in the neutral wire (calculable)
- Maximum average current
- Active, reactive, apparent power
- Averaged maximum active power
- Power factor
- Active energy consumed
- Active energy returned
- Reactive inductive energy
- Reactive capacitive energy
- Total active energy
- Total reactive energy